5.2.19 Display Functionality
|
P74
|
Select P74 to configure the Second Line of the display. In operator level the upper line of the display always shows PV, the second line of the display may be customised from the following list of parameters. |
|||
|
Std |
In Automatic mode the second line of the display will show setpoint. In Manual mode the second line of the display will show output power. In OFF mode it will show OFF. (Std is the factory default for P74) |
|
|
|
|
oP |
In Automatic mode the second line of the display will show output power demand (in %) and is read only. In Manual mode the second line of the display will show output power (in %) and is manually adjustable. In OFF mode the second line of the display will show output power and is fixed at 0.0 (in %). |
|||
|
t.rE |
Timer time remaining, in minutes or hours as configured |
|||
|
t.EL |
Timer time elapsed, in minutes or hours as configured and is read only. |
|||
|
E.Par |
The second line will display an estimate of the energy usage over a given period. This parameter is a totaliser which is useful for estimating the energy usage for individual batches. |
|||
|
E.tot |
The second line will display an estimate of the energy usage over a total period. This parameter is a totaliser which is useful for estimating the energy usage for a complete process. |
|||
|
nonE |
Second line not used (blank) |
|||
|
P75
|
Select P75 to configure the Third Line of the display. The third line of the display is only available in models 808 and 804. It is always read only since only the second line can be written to. In operator level the upper line of the display always shows PV, the third line of the display may be customised from the following list of parameters. |
|||
|
oP |
Output power will be shown in both Automatic and Manual modes. In OFF mode the display will read 0.0 (%). (oP is the factory default for P75) |
|
|
|
|
t.rE |
Timer time remaining, in minutes or hours as configured |
|||
|
t.EL |
Timer time elapsed, in minutes or hours as configured |
|||
|
E.Par |
Energy counter (partial energy counter value) |
|||
|
E.tot |
Energy counter (total energy counter value) |
|||
|
nonE |
Third line not used (blank) |
|||
